View MSS0306-1_192616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOSEL VITELIC
MSS0306
3" VOICE ROM
Features
Single power supply can operate at 2.4V through 4.5V. Current output can drive 8 ohm speaker with a transistor. The voice content is stored up to 3.5 seconds (5100h) and can be separated to 8 sections. Five trigger input pins are provided. Each trigger pin can access a sentence instead of a simple section. A sentence is composed of one or more sections, or table entries. Duration of sections with appended memory-less mute is up to 22 seconds (20000h). Higher key priority is provided. Last key priority is provided. Up to 192 table entries for all sentences. Auto ramp up / ramp down & sleep functions are built in. Playnext OKY is provided optionally chipwise. Continuous S.W.A.I. OKY is provided optionally chipwise. Home S.W.A.I. OKY is provided optionally chipwise. Off LED when Playing audio is provided optionally entrywise. 3/6/12 Hz Ring LED when playing audio is provided optionally entrywise. Dynamic flash LED when playing audio is provided optionally entrywise. 3Hz fix flash LED when playing audio is provided optionally entrywise. 6Hz fix flash LED when playing audio is provided optionally entrywise. On LED when playing audio is provided optionally entrywise. High busy when playing audio is provided optionally entrywise. Low busy when playing audio is povided optionally entrywise. DC high (when playing audio and lasting to next trigger) is provided optionally entrywise. DC low(when playing audio and lasting to next trigger) is provided optionally entrywise. Low Stop after playing audio is provided optionally entrywise. High Stop after playing audio is provided optionally entrywise. OKY's sentences could be different from those from TGS'. 8 loudness levels are provided entrywise. 8 different pitches are provided entrywise. Edge trigger is provided optionally triggerwise. Level trigger is provided optionally triggerwise. Holdable output by TG is provided optionally triggerwise. Retriggerrable TG by itself is provided optionally triggerwise. High trigger is provided optionally triggerwise. Low trigger is provided optionally trigger wise.
1/19
PID239 05/96
MOSEL VITELIC
MSS0306
Description
The MSS0306 is a monolithic CMOS VLSI ASIC that can memorize voice up to 3.5 seconds (at 6KHz S.R.) using MOSEL qualified coding method (MPCM-4) in 8 sections. Both the volume and pitch can be different for each entry each sentence. 3 versatile outputs are available through programmable logic array. Most of the necessary circuit are built in like oscillator, ROM, DAC and interface logic. Customer voice data will be edited and built in by mask programming during the device fabrication.
Mask Option
Either LED function or STATUS function for OUT X pin. Either LED function or STATUS function for OUT Y pin. Either LED function or STATUS function for OUT Z pin. Either initial low or inital high for OUT X pin. Either initial low or inital high for OUT Y pin. Either initial low or inital high for OUT Z pin. Among (0) on LED (1) 3Hz Ring (2) dynamic flash (3) 6Hz Ring (4) 12Hz Ring (5) 3Hz fix flash (6) 6Hz fix flash (7) off LED for LED selection when playing audio for every entry. Among (0) high busy (1) low busy (2) DC high (3) reserved (4) reserved (5) DC low (6) low stop (7) high stop for STATUS selection for every entry. Either TG5 or OKY for TG5/OKY pin. Either Continuous S.W.A.I. or Home S.W.A.I. for PLAYNEXT selection. S.W.A.I. means sequence when after interrupt occured. Either small loop or large loop for OKY cycle. 8 loudness levels 7, 6, 5, 4, 3, 2, 1, 0 for each sentence each entry. 8 different pitches 7, 6, 5, 4, 3, 2, 1, 0 for each sentence each entry. Either Edge or Level trigger type for TG1 pin. Either Edge or Level trigger type for TG2 pin. Either Edge or Level trigger type for TG3 pin. Either Edge or Level trigger type for TG4 pin. Either Edge or Level trigger type for TG5/OKY pin. Either active high or active low for TG1 pin. Either active high or active low for TG2 pin. Either active high or active low for TG3 pin. Either active high or active low for TG4 pin. Either active high or active low for TG5/OKY pin. Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG1 pin. Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG2 pin. Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG3 pin. Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG4 pin. Among (a) Holdable & Irretrigger & No stop (b) Unhold & Irretrigger (c) Unhold & Retrigger for TG5/OKY pin.
2/19
PID239 05/96
MOSEL VITELIC
MSS0306
Block Diagram
V DD
V SS
TG1 TG2 TG3 TG4 TG5/OKY OUTX OUTY OUTZ OSC
CONTROL LOGIC
TIMING GENERATOR
ADDRESS GENERATOR VOICE ROM
TRIGGER TABLE CLOCK GENERATOR
MPCM DECODER CURRENT BUFFER C OUT
Pad Description
Pad No. Signal Name 1 V DD 2 OUTZ C OUT 3 4 5 6 7 8 9 10 11 12 13 OUTY OUTX VSS OSC NC TG5/OKY TG4 TG3 TG2 TG1 I/O Power O O O O Power I NC I I I I I Function
Positive power supply Status ( STOP/BUSY) or LED output Audio signal current output (for speaker) Status ( STOP/BUSY) or LED output Status ( STOP/BUSY) or LED output Negative power supply Oscillator resistor input No connection Tirgger 5 or One-key input, high active or low active, mask optional Trigger 4 input, high active or low active, mask optional Trigger 3 input, high active or low active, mask optional Trigger 2 input, high active or low active, mask optional Trigger 1 input, high active or low active, mask optional
Signals
Cout Cout is tristate during standby. Cout has zero current output when sound data is zero. Cout has full current output when sound data is the highest. Cout has half of full current output when sound is silence at middle data value. Cout has half of full current output when playing sound at appended memory-less mute. The bypass Cout Resistor is used to bypass the audio output current from Cout. This bypassing extra current to ground gives a way to prevent the saturation of audio waveform amplified by transistor. This Resistance is 470 ohm typically. It always is not very small. Or user can let it open if the transistor has a fair beta value. A transistor with beta value 150 is sufficient for typical applications. Larger beta value get larger sound but may have the amplified waveform saturated.
3/19
PID239 05/96
MOSEL VITELIC
MSS0306
8 ohm speaker is recommended. The speaker characeristics and housing impacts the loudness very much. When user is using variable loudness, user must carefully calculate the bypass resistance and transistor's beta value due to that the current from Cout may vary very much due to user's specified loudness variance.
Terms
Retriggerable TG Retriggerable TGm means the sentence addressed by TGm could be retriggerred by other TGs. See Timing diagrams. Of course, it can be retriggered by itself. See Timing diagrams II. Hold and Retrigger This combination allows user controlling both the output and the input. Its output is holdable and the input could retrigger the former. This is an exquisite feature, to ensure your application is fit to this feature or not before being manufactured is recommended strongly. Or the user may overshoot the mark and end up with a blunder. To contact MVI sales representatives is the best solution for this feature. Small Loop & Large Loop This is a function belongs to OKY. OKY plays many sentences, up to 32. User can play 1st sentence through 32nd sentence if user selects "large loop". At this time the sentence lst, 2nd, 3rd and 4th may be triggerred by TGs. User will play 16 sentences, from 17th through 32nd sentence, when user selects "small loop". User may have less sentences triggered by OKY at this selection. But user definitely can prevent those OKY's sentences triggerred by TGs. Cycle Loop This is a count number ranges 1 through 32 which defines the sentence range OKY will play. This number is determined automatically by the sentences user filled, user defined. Continuous OKY & Home OKY This is a function belongs to OKY and determines the play sequence when the first OKY comes after any other trigger addressing. The "continuous" preserves the sequence while the "home"rewinds to the very beginning. This very beginning means either 17th sentence or 1st sentence which is determined by Loop Size - small or large. You will see a term S.W.A.I. in this data sheet, it means sequence when after interrupt by other trigger addressing.
Ring 3 Hz LED Ring 3 Hz LED had better to mask 3 LED sink pins together. But if user insists, two LED pins or one LED pin could be used to perform this ring function. LEDX and LEDY must be adopted to perform "Ring" if user specifies 2 LEDs. Adopting LEDX and LEDZ is not guaranteed the performance. Of course adopting LEDY and LEDZ is not guaranteed, either. LEDX must be adopted to perform "Ring" if user specifies one LED. Neither adopting LEDY nor LEDZ can perform guaranteed function. Each LED turns on for 333 ms (1/3 second) and turns off for 667 ms (2/3 second). LEDX turns on first. LEDY turns on immediately after LEDX turns off. LEDZ turns on immediately after LEDY turns off. LEDX turns on again immediately after LEDZ turns off. This 3Hz is sample rate dependent. Ring 6 Hz LED It performs what "Ring 3 Hz LED" works except the turn on and off frequency. Each LED turns on for 1/6 second and turns off for 2/6 seconds. Ring 12 Hz LED It performs what "Ring 3 Hz LED" works except the turn on and off frequency. Each LED turns on for 1/12 second and turns off for 2/12 seconds. Fix flash LED Fix 3 Hz flash means this pin turns LED lamp on for 166ms and then turns it off for 166ms alternately. Fix 6 Hz flash means quicker, it turns on 83 ms and then turns off 83 ms. There are up to 3 LED sink pins could be manufactured as user's mask specified. LEDX is synchronous with LEDZ. LEDY shifts 180 degrees phase with LEDX. User can find their timing relationships on timing diagram VI. These 3Hz as well as 6Hz are sample rate dependent. Dynamic Flash LED The LED turns on whenever the sound amplitude is over a certain threshold potential. Three LEDs (X, Y and Z) have different threshold. LEDX is the easiest to turn on. LEDY's threshold is the highest. LEDX's is 4/8 of full scale output current. LEDY's is 7/8 while LEDZ's is 6/8. For example, A point (a sample pixel) of sound in volume level 90% of full scale output current, it will turn on all three LEDs. A point in 80% current will turn on LEDX as well as LEDZ. A point in 70% current will turn on LEDX only. A point in 49% current or less turns no LED on. Initial high & Initial low This is a function belongs to OUTs. It defines the state only from power on to the first audio activated. It is effective both for LED and Status. "Initial low" means user want this OUT pin is put to low
4/19
PID239 05/96
MOSEL VITELIC
MSS0306
whenever this chip is power on. "Initial high" means vice versa. Initial high is good for LED because that high will forbid the LED to be turned on, user want not keep the LED light even user don't use very long time since user power on the chip. So, we suggest user to define "initial high" whenever LED is chosen for that OUT pin. But it is not absolutely right. User may on purpose turn it on once user likes it. Initial low is good for STATUS because that low will have every Status starts from zero on whole time line. So, user are suggested to define "initial low" whenever Status is chosen for that OUT pin. But it is not absolutely right. User may on purpose have a high to do whatever user want, to turn a motor running this way or tell a situation since power on, etc. DC 0 & DC 1 This is a function belongs to OUTs. User may be confused it with Busy. It is similar to Busy signal but it is not only valid during audio is being played, like Busy, but also valid after the audio has been played. Its response lasts until next audio entry is activated. DC0 means zero potential (Vss) while the DC1 means the Vdd. Sample Rate There are some parameters depend on sample rate. They are debounce time, LED Ring frequency, LED fix flash frequency and Stop pulse width. The numbers mentioned in this data sheet are based on 6 KHz sample rate if not specified. Higher SR has LED flashes quicker. Higher SR makes Stop pulse shorter. Higher SR let the debounce time shorter. This chip provides multi-SR function. What it means is that user can digitize two different sounds in different SR but plays them by a common Rosc. For example, user has rocket sound digitized in 9.5 KHz but have rooster digitized at 6KHz. While manufactured, user just specify different pitch numbers on request form - 4 for rocket and 1 for rooster. The chip could be played those two sounds at a Rosc fit for 6 KHz SR. Because that "pitch 4" at 6 KHz Rosc means 6 KHz playback while "pitch 1" at 6 KHz Rosc meas playback in 1.6 times 6 KHz. The 1.2 M ohm Rosc playback 6 KHz sample rate typically, but just typical. Smaller Rosc playbacks quicker - Higher pixel rate. MVI provides voice chip with very flat response for playback vs working voltage. Higher working voltage get slower playback but insignificantly. Stop Pulse Stop pulse is one of Status definition. There never is this pulse o/p if user defines this o/p pins as LEDs.
This Stop pulse is not guaranteed when user defines the trigger behavior as Holdable. Stop pulse width is determined on the sample rate as well as the pitch of that playing entry when stop pulse occurs. Higher Key Priority What's the result when multi triggers are activated simultaneously? Which trigger is acknowledged among these five? Among these four? Among these three? Between these two? The higher key priority means the trigger with higher index has the priority to be acknowledged and responsed when there are several triggers activated simultaneously. For example: Three triggers are activated simultaneously, TG1,2,3. The TG3 has the priority, sentence 3 will be responsed. For another example: Five triggers are activated simultaneously, TG1,2,3,4,5. The TG5 has the priority, sentence 5 will be responsed. First Key Priority This feature is not provided on this MSS0306 chip. But it still worth to explain. This defines the relationship on time line for two or more triggers. While user activating a trigger, for example TG1, and its sound plays, user is unable to activate the other trigger once the TG1 is kept activated regardless TG1's sound is finished or not. It means first TGn prohibits the acknowledge of latter TGms when TGn is kept true. Last Key Priority This defines the relationship on time line for two or more triggers. What will it result when a trigger is activated while a trigger is true ahead and kept true ? While user already activates a trigger, for example TG1, and keeps this TG1 true, the latter trigger is still able to come in and acknowledged by chip. It means the last trigger is not prohibited by formers. See timing diagram VII for reference. User may be confused it with "retrigger". They are different.
5/19
PID239 05/96
MOSEL VITELIC
MSS0306
Loudness Levels Reference Mask 111 110 101 100 011 010 001 000 Index 7 6 5 4 3 2 1 0 I output Loudness 100% x Ico Loudest 87% x Ico 75% x Ico 62% x Ico 50% x Ico 37% x Ico 25% x Ico 12% x Ico Least Loud
Pitches Reference h Mask Index Playback PlaybackPitc 111 7 73% x Fosc Fosc / 1.37 Slowest 110 6 80% x Fosc Fosc / 1.25 101 5 88% x Fosc Fosc / 1.13 100 4 100% x Fosc Standard 011 3 115% x Fosc 010 2 133% x Fosc 001 1 158% x Fosc 000 0 198% x Fosc Fastest
The precision is +/- 10%
The precision is +/- 10%
Absolute Maximum Rating
Symbol VDD ~ VSS VIN VOUT T (Operating) T (Storage)
Rating
-0.5 ~ +7.0 VSS -0.3 < V IN < VDD+0.3 VSS Unit V V V C C
DC Characteristics at 4.5 Vdd (S0306T) SymbolParameter I sb Standardby I I op Operation I I ih4 input high I I iL4 input low I I ih5 input high I I iL5 input low I I ohr output high I I oLr output low I I co current output V co Current o/p V R osc Oscillation R R osc Oscillaion R R cds cds R d F/F Frq. stability d F/F Frq. variation Valid Min. Vdd Vdd TG1-4 TG1-4 TG5/OKY TG5/OKY OUTX,Y,Z OUTX,Y,Z Cout Cout Rosc Rosc Typ. 100 10 0 10 0 -20 20 4.4 1200 940 +/- 5 +/- 10 Max. 1 200 20 20 Unit. uA uA uA uA uA uA mA mA mA mV Kohm Kohm Kohm % % Condition i/o open mask:=active high mask:=active high mask:=active high mask:=active high
5
half scale SR=6 KHz SR=8 KHz [F(4.5V)-F(4.0V)]/F(4.5V) lot by lot
6/19
PID239 05/96
MOSEL VITELIC
MSS0306
DC Characteristics at 3.0 Vdd (S0306T) SymbolParameter I sb Stand by I I op Operation I I ih4 input high I I iL4 input low I I ih5 input high I I iL5 input low I I ohr output high I output low I I oLr current output I co Current o/p V V co R osc Oscillation R R osc Oscillaion R R cds cds R Frq. stability d F/F Frq. variation d F/F Valid Min. Vdd Vdd TG1-4 TG1-4 TG5/OKY TG5/OKY OUTX,Y,Z OUTX,Y,Z Cout Cout Rosc Rosc Typ. 75 0 0 -10 10 2.2 1200 950 +/- 5 +/- 10 Max. Unit. 1 uA 150 uA 15 uA uA 15 uA uA mA mA mA mV Kohm Kohm Kohm % % Condition i/o open mask:=active high mask:=active high mask:=active high mask:=active high
half scale SR=6 KHz SR=8 KHz [F(3.0V)-F(2.7V)]/F(3.0V) lot by lot
DC Characteristics at 4.5 Vdd (S0306J) SymbolParameter I sb Stand by I I op Operation I I ih4 input high I I iL4 input low I I ih5 input high I I iL5 input low I I ohr output high I output low I I oLr current output I co Current o/p V V co R osc Oscillation R R osc Oscillaion R R cds cds R Frq. stability d F/F Frq. variation d F/F Valid Min. Vdd Vdd TG1-4 TG1-4 TG5/OKY TG5/OKY OUTX,Y,Z OUTX,Y,Z Cout Cout Rosc Rosc Typ. 100 10 0 10 0 -20 20 3.4 1200 900 +/- 5 +/- 10 Max. 1 200 20 20 Unit. uA uA uA uA uA uA mA mA mA mV Kohm Kohm Kohm % % Condition i/o open mask:=active high mask:=active high mask:=active high mask:=active high
half scale SR=6 KHz SR=8 KHz [F(4.5V)-F(4.0V)]/F(4.5V) lot by lot
7/19
PID239 05/96
MOSEL VITELIC
MSS0306
DC Characteristics at 3.0 Vdd (S0306J) SymbolParameter I sb Standardby I I op Operation I I ih4 input high I I iL4 input low I I ih5 input high I I iL5 input low I I ohr output high I output low I I oLr current output I co Current o/p V V co R osc Oscillation R R osc Oscillaion R R cds cds R Frq. stability d F/F Frq. variation d F/F AC Characteristics Timing
T STOP TR TP TT Stop Pulse width Power Ripple width Power Rise up time Debounce time or minimal Trigger pulse width
Valid Min. Vdd Vdd TG1-4 TG1-4 TG5/OKY TG5/OKY OUTX,Y,Z OUTX,Y,Z Cout Cout Rosc Rosc
Typ. 75 0
Max. 1 150 15 15 0 -10 9 1.7
1200 910 +/- 5 +/- 10
Unit. uA uA uA uA uA uA mA mA mA mV Kohm Kohm Kohm % %
Condition i/o open mask:=active high mask:=active high mask:=active high mask:=active high
half scale SR=6 KHz SR=8 KHz [F(3.0V)-F(2.7V)]/F(3.0V) lot by lot
Min.
40 -
Typ.
10
Max.
1 1 -
Unit
ms ms ms ms SRD SRD
SRD : Sample Rate Dependent
Standard Codes Lineup Code # 002 003 004 006 007 008 010 013 026 031 Triggers 1,2,3,4,5 1,2 1,2,3,4,5 1,2,3,4 1,2,3 1,2,3,4 1,2,3,4 1,2,3 1,2,3,4,5 1,2,3 OKY NO OKY NO OKY OKY OKY OKY NO NO OKY Title Police Car Happy Chinese New Year Go Go Train Laughing Witch Cuckoo Bird Gun Set Shrilling Gird Running Car Happy Train Running Neighing
8/19
PID239 05/96
MOSEL VITELIC
MSS0306
Timing Diagram
I. Acceptable Power On Signal & Ripple
TP 90% V DD TR 90% V DD V DD
VSS = 0.0 V
10% VDD
II. Edge/Unholdable/Retrigger/LED/STOP/BUSY Trigger Mask
TG2 AUDIO LED STOP BUSY Sent2 Sent2 Sent2
III. Level/Unholdable/Retrigger/LED/STOP/BUSY Trigger Mask
TG1 TG2 AUDIO LED STOP BUSY Sent2 Sent2 Sent1 Sent2 Sent2
IV. Edge/Holdable/Retrigger/LED/STOP/BUSY Trigger Mask
TG1 TG2 AUDIO LED STOP BUSY Sent2 Sent1 Sent2
V. Level/Holdable/Retrigger/LED/STOP/BUSY Trigger Mask
TG1 TG2 AUDIO LED STOP BUSY Sent2 Sent1 Sent2 Sent2
9/19
PID239 05/96
MOSEL VITELIC
MSS0306
VI. Status & LED Outputs
AUDIO LEDX Fix flash
{ LEDY
LEDZ LEDX
Ring
{ LEDY
LEDZ
STOP BUSY
VII. Key Priority VII. 1 At the same time ( Higher priority, TG5>TG4>TG3>TG2>TG1)
TG1 TG2 TG3 TG4 TG5 AUDIO
URLS URES UILS UIES UIES
Sent5
Sent3
VII. 2 Triggered at different time 1, Last key priority and else
TG1 TG2 TG3 TG4 AUDIO BUSY Sent1 Sent2 Sent3
URLS URES UILS UIES
Sent4
Sent2
VII. 3 Triggered at different time 2, Last key priority and else
TG1 TG2 TG3 TG4 AUDIO BUSY Sent1 Sent2 Sent3 Sent3
URLS URES UILS UIES
Sent4
Sent2
Sent3
VIII. Debounce Time
TG
TT
AUDIO
10/19
PID239 05/96
MOSEL VITELIC
MSS0306
Application Circuit
1. Typical Application
1550um 1 2 3 R2 OUTY OUTX 1850um 13 12 11 10 4 6 7 9 TG1 TG2 TG3 TG4 TG5
Pad No. Designation
1 2 3 4 5 6 7 8 9 10 11 12 13 VDD OUTZ COUT OUTY OUTX VSS OSC NC TG5 / OKY TG4 TG3 TG2 TG1
X -608.5 -608.5 -608.5 -608.5 -602.9 -602.9 95.1 333.7 608.5 608.5 608.5 608.5 608.5
Y 728.7 415.9 173.5 -389.5 -731.7 -731.7 -731.7 -731.7 -629.9 -316.7 -3.5 309.7 622.9
VDD S OUTZ COUT T
VSS
OSC
R1
NC
Unit: m
NOTE : SUBSTRATE is VDD
Pad Size = 90um X 90um
2. CDS Application
3. Use LED Pin To Drive LED
R1
VDD OSC TG COUT VSS R2 T
S
R1
VDD OSC
S T
TG1 TG2 R2 TG3 TG4 TG5 OUTX
OUTY OUTZ VSS
COUT
LED
Taiwan #1, Creation Road I, Science - based Industrial Park, Hsinchu, 30077 Taiwan, ROC "taylor_hsiao@ccmail.mosel.com.tw" TEL: 886-3-5770055 FAX: 886-3-5772788 FAX: 886-3-5784732
Taipei 7F, #102 Sec. 3, Ming Chung E. Road, Taipei Taiwan, ROC TEL: 886-2-5451213 FAX: 886-2-5451214
Hongkong #19 Dai Fu Street, Taipo Industrial Estate, Taipo, N.T. Hongkong TEL: 852-2388-2777 TEL: 852-2665-4883 FAX: 852-2664-2406 FAX: 852-2770-8011
U.S.A. #3910 North First Street, San Jose, CA. 65134-1501 U.S.A. TEL: 1-408-433-6000 FAX: 1-408-433-0952
11/19
PID239 05/96
MOSEL VITELIC
MSS0306
886-3-5772788 (fax)
To: Attn :
Mosel Vitelic Inc.
TITLE
Sales & Marketing Department
Product Request Form
I hereby request MVI to start preparing produce MSS0306 which is specified as below description as well as attached form(s). I already read this data sheet PID 239 and understand MSS0306 completely and know
how to specify to fit my requirement. General Desciptions Customer Cannot proceed when empty Agent Sales Repr'tives Who is MVI sales you contact ? Providing to MVI 8-bit PCM sound files .WAV sound files DAT or equivalent application is special, see our written memo Others Service Required from MVI EPROMs with data inside files to be programmed into EPROM 9016 emul'n board & Eprom Confirm table Others TG5 OKY No use & don't care Specify below only for OKY Playnext No use & don't care Home sequence when after Interrupt Continue sequence when after Interrupt No use & don't care Small Loop (17-32) Large Loop (1-32) No use and don't care Power Source Working Voltage Chip descriptions Title SampleRate Output Device Hz Buzzer (F fr =1KHz) Speaker (0.25W, 8 ohm, 1" diam.) Other: 2.5 V 3.0 V 3.5 V 4.0 V 4.5 V Battery size "D" size "AA" size "AAA" other size = Mains Other
Form K is attached due to this Single form meets my need. Form H and J are attached due to these simple forms meet my demand. Form G, C, B, A are attached due to my application is delicate.
Company Name : Signature : Department/Section :
Fax number : Date : Position Title :
12/19
PID239 05/96
MOSEL VITELIC
There are 1<
MSS0306
<192 entries included in this sentence. 1< <32
Product Request Form A: Sentence
Section
76543210
Definitions T I T L E
There are 1< 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
<64 words defined on this page.
Pitch
76543210
Loudness
76543210
OUTX
OUTY
OUTZ
76543210
76543210 76543210
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Page of Signature & date
MVI Sales & date
13/19 PID239 05/96
MOSEL VITELIC
MSS0306
1< <32
Product Request Form B: Sentence
Section
76543210
Definitions T I T L E
There are 0< 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
<64 words defined on this page.
Pitch
76543210
Loudness
76543210
OUTX
OUTY
OUTZ
76543210
76543210 76543210
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 Page of Signature & date
MVI Sales & date
14/19 PID239 05/96
MOSEL VITELIC
MSS0306
1< <32
Product Request Form C: Sentence
Section
76543210
Definitions T I T L E
There are 0< 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191
<64 words defined on this page.
Pitch
76543210
Loudness
76543210
OUTX
OUTY
OUTZ
76543210
76543210 76543210
128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 Page of Signature & date
MVI Sales & date
15/19 PID239 05/96
MOSEL VITELIC
MSS0306
TITLE
Mute Length File name Check Sum
Product Request Form G: (Trigger & Entry dependent) *Section Definition: There are 1< section defined.
Address Voice Description 0
Voice Length
s s s s s s s s
ooh ooh ooh ooh ooh ooh ooh ooh
s s s s s s s s
ooh ooh ooh ooh ooh ooh ooh ooh
h h h h h h h h
1 2
3
4
5 6 7
ooh < 5100h
*Trigger Option Definition:
TG1 Edge Level Edge Level Edge TG3 Level Edge Level Edge Level Active High Active Low Active High Active Low Active High Active Low Active High Active Low Active High Active Low Retrigger & Unhold Retrigger & Hold & No stop Retrigger & Unhold Retrigger & Hold & No stop Retrigger & Unhold Retrigger & Hold & No stop Retrigger & Unhold Retrigger & Hold & No stop Retrigger & Unhold Retrigger & Hold & No stop Irretrigger & Unhold Don't care Irretrigger & Hold & No stop Irretrigger & Unhold Don't care
TG2
Irretrigger & Hold & No stop Irretrigger & Unhold Don't care
Irretrigger & Hold & No stop Irretrigger & Unhold Don't care
TG4
Irretrigger & Hold & No stop Irretrigger & Unhold Don't care
TG5
Irretrigger & Hold & No stop
*Trigger Sentence Definition & Its Outputs definition: There are 1<
Forms A,B,C (pages Forms A,B,C (pages Forms A,B,C (pages Forms A,B,C (pages Forms A,B,C (pages , , , , , , , , , ,
sentences define
d
respectively) are attached to define sentence of TG1. respectively) are attached to define sentence of TG2. respectively) are attached to define sentence of TG3. respectively) are attached to define sentence of TG4. respectively) are attached to define sentence of TG5.
Forms As,Bs,Cs are attached to define TG6 through TG16's sentences for OKY responses. Forms As,Bs,Cs are attached to define TG17 through TG32's sentences for OKY responses.
Company Name : Signature :
16/19
MVI Sales : Date :
PID239 05/96
MOSEL VITELIC
MSS0306
TITLE
Mute Length File name Check Sum
Product Request Form H: (Trigger / Sentence dependent) *Section Definition: There are 1< section defined.
Address Voice Description 0
Voice Length
s s s s s s s s
ooh ooh ooh ooh ooh ooh ooh ooh ooh
s s s s s s s s
< 5100h
ooh ooh ooh ooh ooh ooh ooh ooh
h h h h h h h h
Don't care
1 2
3
4
5 6 7
*Trigger Option Definition:
TG1 Edge Level Edge Level Edge TG3 Level Edge Level Edge Level Active High Active Low Active High Active Low Active High Active Low Active High Active Low Active High Active Low Unhold & Retrigger Hold & Retrigger & No stop Unhold & Retrigger Hold & Retrigger & No stop Unhold & Retrigger Hold & Retrigger & No stop Unhold & Retrigger Hold & Retrigger & No stop Unhold & Retrigger Hold & Retrigger & No stop 1<
Unhold & Irretrigger Hold & Irretrigger & No stop Unhold & Irretrigger Hold & Irretrigger & No stop Unhold & Irretrigger Hold & Irretrigger & No stop Unhold & Irretrigger Hold & Irretrigger & No stop Unhold & Irretrigger Hold & Irretrigger & No stop
Don't care
TG2
Don't care
Don't care
TG4
Don't care
TG5
*Trigger Sentence Definition: There are
TG1 TG2 TG3 TG4 TG5
sentences define
d
Address Count
Sentence Description (Word section addresses)
*Output Definition 1:
SS & iH OUTX LED & iH DNC SS & iH OUTY LED & iH
Address count summation= DNC SS & iH SS & iL OUTZ LED & iH LED & iL
<192 DNC
SS & iL LED & iL SS & iL LED & iL SS:=StausiH:=initial highiL:=initial lowDNC:=Don't care Company Name : Signature :
17/19
MVI Sales : Date :
PID239 05/96
MOSEL VITELIC
MSS0306
TITLE Neither variable pitch nor variable loudness is used.
Product Request Form J:(Trigger / Sentence dependent) *Output Definition 2 :
TG1
7, High Stop or Off LED 6, Low Stop or 6Hz LED 5, DC o or 3Hz fixed LED 4, NA or 12 Hz Ring LED 3, NA or 6 Hz Ring LED 2, DC 1 or Dynamice LED 1, Low Busy or 3Hz Ring LED 0, High busy or On LED Don't care 7, High Stop or Off LED 6, Low Stop or 6Hz LED 5, DC o or 3Hz fixed LED 7 6 5 4 3 2 1 0
TG2
7 6 5 4 3 2 1 0
TG3
7 6 5 4 3 2 1 0
TG4
7 6 5 4 3 2 1 0
TG5
OUTX OUTY OUTZ
don't care 7 6 5 4 3 2 1 0 don't care 7 6 5 4 3 2 1 0 don't care
don't care 7 6 5 4 3 2 1 0 don't care 7 6 5 4 3 2 1 0 don't care
don't care 7 6 5 4 3 2 1 0 don't care 7 6 5 4 3 2 1 0 don't care
don't care 7 6 5 4 3 2 1 0 don't care 7 6 5 4 3 2 1 0 don't care
4, NA or 12 Hz Ring LED 3, NA or 6 Hz Ring LED 2, DC 1 or Dynamice LED 1, Low Busy or 3Hz Ring LED 0, High busy or On LED Don't care 7, High Stop or Off LED 6, Low Stop or 6Hz LED 5, DC o or 3Hz fixed LED 4, NA or 12 Hz Ring LED 3, NA or 6 Hz Ring LED 2, DC 1 or Dynamice LED 1, Low Busy or 3Hz Ring LED 0, High busy or On LED Dont'care
Company Name : Signature :
18/19
MVI Sales : Date :
PID239 05/96
MOSEL VITELIC
MSS0306
TITLE
Product Request Form K: (whole chip dependent) *Section Definition : There are 1<
Address Voice Description 0
sections defined.
Voice Length Mute Length File name Check Sum
s s s s s s s s
Level
ooh ooh ooh ooh ooh ooh ooh
s s s s s s s
ooh ooh ooh ooh ooh ooh ooh ooh
h h h h h h h h
1 2
3
4
5 6 7
*Tirgger Option Denfinition:
Edge Unhold & Irretrigger Unhold & Retrigger Hold & Irretrigger & No Stop Status Hold & Retrigger & No Stop Status
s ooh ooh < 5100h
Active high Don't care
Active low
*Trigger Sentence Definition: There are 1< sentences define
Sentence Description (Word section addresses) Address Count
TG1 TG2 TG3 TG4 TG5
*Output Definition:
OUTX SS & iH SS & iL LED & iH LED & iL Don't Care
Neither variable pitch nor variable loudness is used.
Address count summation=
<192 OUTZ 7 6 5 4 3 2 1 0 Don't care
OUTY SS & iH SS & iL LED & iH LED & iL Don't Care
OUTZ SS & iH SS & iL LED & iH LED & iL Don't care iL:= initail low
OUTX 7 6 5 4 3 2 1 0 Don't Care MVI Sales : Date :
19/19
OUTY 7 6 5 4 3 2 1 0 Don't Care
SS:= Status iH:= initial high
7:= High Stop or Off LED 3:= NA or 6 Hz Ring LED 6:= Low Stop or 6Hz LED 2:= DC1 or Dynamic LED 5:= DC o or 3Hz fixed LED 1:= Low Busy or 3Hz Ring LED 4:= NA or 12 Hz Ring LED 0:= High Busy or On LED Company Name : Signature :
PID239 05/96

▲Up To Search▲

Price & Availability of MSS0306-1

	To Download MSS0306-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .